Machinist's Workshop « Metalworking « Storefront

Questions? Get Online Help
Call 1-800-447-7367 or 231-946-3712,
Monday-Friday 8AM-5PM EST.

Filter Results

Crobalt Cutoff Blade for FoR Parting Tool

FoR holder takes common 1/2" x 3/32" tapered type parting blade. Beveled top and bottom to lock securely into a holder.
The FoR Parting Tool Holder does not include a blade in the purchase, but these are widely available from several manufacturers and many suppliers worldwide. The blade is easily sharpened on any bench grinder and instructions for setting up, sharpening, and tips for best results, are included with the holder.
Blades are double bevel for use in Brown and Sharpe type holders. Can be used in either a right or left hand holder.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$70.00

In Stock

BC210

Crobalt Solid Round Bit 1/4"x2" L

Crobalt solid round tool bits are furnished centerless ground to the tolerances shown above, with both ends ground square. These tool bits are appropriate for use in a Diamond Toolholder, for especially smooth cuts on tough materials. They are recommended for boring, drilling and reaming applications. Solid rounds can also be furnished to different tolerances, and in the as-cast condition with a stock allowance of .030" on the diameter.
This machine lathe metal-cutting tool assures you of a smooth finish on any metal or even hard plastic. Crobalt has proven itself to be the best of the new alloys.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$14.00

In Stock

BC208

Crobalt Solid Round Bit 3/16"x1-1/2" L

These Crobalt tips are 3/16" x 1-1/2" with round ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This size is appropriate for the users of the new ML8mm Diamond Toolholders, designed for the small bench top lathes, such as the Unimat, Atlas 6", Sherline, and other new Asian lathes.
Crobalt cast alloy is an alternative tool bit to the HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium, there is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 1/4" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The lathe is a 1960s Colchester Chipmaster.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$14.00

In Stock

BC239

Crobalt Solid Round Bit 5/16"x2" L

These Crobalt tips are ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This size is appropriate for the users of the new ML8mm Diamond Toolholders, designed for the small bench top lathes, such as the Unimat, Atlas 6", Sherline, and other new Asian lathes.
Crobalt cast alloy is an alternative tool bit to the HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium, there is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 1/4" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The lathe is a 1960s Colchester Chipmaster.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$16.00

In Stock

BC268

Crobalt Square Bit 3/16"x1-1/2" L

Crobalt cast alloy is an alternative tool bit to the 3/16" HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium. There is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 3/16" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The Crobalt tips come with square cut ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This particular size is specifically chosen to work on the ML8 Diamond Toolholder, both Right-hand and Left-hand models.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$14.00

In Stock

BC227

Crobalt Square Bit 5/16"x1-1/2" L

Crobalt cast alloy is an alternative tool bit to the 5/16" HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium. There is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 5/16" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The lathe is a 1960s Colchester Chipmaster.
The Crobalt tips come with square cut ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This particular size is specifically chosen to work on the ML8 Diamond Toolholder, both Right-hand and Left-hand models.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$16.00

In Stock

BC259

Drilling, Reaming, Tapping and Milling on the Drill Press DVD

Falk No. 01 Locomotive - PRICE RECENTLY REDUCED

Figure It Out - Common Sense and a Calculator DVD

By Rudy Kouhoupt

Did you ever wonder how high the valves should lift; what happens when you scale it up or down; how big the inlet passage should be; why small engines run so fast; how heavy it will be; how the flywheel effect changes with size; how to set your lathe for greater accuracy; or how to check tapers and angles? Rudy describes and illustrates his real world approach to problem solving on these and other subjects in the shop and at the drawing board. He includes an outline and drawings of examples used in the DVD presentation.
Watch a brief clip from the DVD.

$35.95

In Stock

BC75

Fundamentals of Machine Lathe Operation DVD

Fundamentals of Milling Machine Operation DVD

GMAW (MIG) Wire Feed Welding DVD

By Steve Bleile

This DVD was produced in 2002 provides a "working knowledge" of the technical aspects, plus the welder skills necessary for using the Gas Metal Arc Welding process, commonly referred to as mig welding (solid wire with an externally furnished shielding gas). This process has been used in industry for a long time, but with the development of smaller, less expensive welding machines, it is becoming widespread in home shops because of its ease of operation. Steve also covers safety concerns inherent with all welding procedures. 45 minutes.

$25.95

In Stock

BC84

Hot Bluing Firearms DVD

By Steve Acker

The chemical and mechanical processes of hot bluing steel are described by Steve. He then demonstrates the procedures with the best quality equipment and materials. He also describes how you can blue your firearms on a limited budget. Learn to apply a professional finish to your firearms and restore the beauty of your old ones. See a layout used by professionals for profitable bluing and excellent results. Equipment, alternate heat sources and safety concerns are discussed in detail. 1 hour 10 minutes.

$49.95

In Stock

BC92

** US Pricing. Foreign pricing applied during checkout process.

Village Press

Storefront

Metalworking

Machinist's Workshop

VP Storefront One-Stop shopping for all Village Press publications