VP

Add To Cart

FoR 16mm Parting Tool Combo

FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 16mm Diamond Toolholder.

• Inverted blade design significantly reduces chance of jam-up and blade breakage
• Minimal side overhang and no front overhang help maximize rigidity
• Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
• Lack of swarf on top of blade means coolant is free to get right in to cutting edge
• Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
• Simple to resharpen--only front face has to be ground.

$160.00

In Stock

BC272PKG

Add To Cart

FoR 20mm Parting Tool Combo

FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 20mm Diamond Toolholder.

• Inverted blade design significantly reduces chance of jam-up and blade breakage
• Minimal side overhang and no front overhang help maximize rigidity
• Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
• Lack of swarf on top of blade means coolant is free to get right in to cutting edge
• Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
• Simple to resharpen--only front face has to be ground.

$160.00

In Stock

BC285PKG

Add To Cart

FoR 8mm Parting Tool Combo

FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 8mm Diamond Toolholder.

• Inverted blade design significantly reduces chance of jam-up and blade breakage
• Minimal side overhang and no front overhang help maximize rigidity
• Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
• Lack of swarf on top of blade means coolant is free to get right in to cutting edge
• Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
• Simple to resharpen--only front face has to be ground.

$150.00

In Stock

BC236PKG

Add To Cart

FoR 9.5mm Parting Tool Combo

FoR (Front or Rear) Inverted Parting Toolholder includes a fine, high-strength Crobalt parting tool. Operates with blade held upside down. Use in front or rear tool post. Model specifically set for tool posts on 9.5mm Diamond Toolholder.

• Inverted blade design significantly reduces chance of jam-up and blade breakage
• Minimal side overhang and no front overhang help maximize rigidity
• Cutting takes place on underside. Swarf tends to fall out of groove rather than pile up on top of cutting edge
• Lack of swarf on top of blade means coolant is free to get right in to cutting edge
• Horizontal mounting of blade further reduces chance of blade pulling itself into cut and is especially advantageous when turning brass and bronze.
• Simple to resharpen--only front face has to be ground.

$150.00

In Stock

BC235PKG

Add To Cart

Crobalt Cutoff Blade for FoR Parting Tool

FoR holder takes common 1/2" x 3/32" tapered type parting blade. Beveled top and bottom to lock securely into a holder.
The FoR Parting Tool Holder does not include a blade in the purchase, but these are widely available from several manufacturers and many suppliers worldwide. The blade is easily sharpened on any bench grinder and instructions for setting up, sharpening, and tips for best results, are included with the holder.
Blades are double bevel for use in Brown and Sharpe type holders. Can be used in either a right or left hand holder.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$70.00

In Stock

BC210

Add To Cart

FoR 16mm Parting Tool

The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$105.00

In Stock

BC271

Add To Cart

FoR 20mm Parting Tool

The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$105.00

In Stock

BC284

Add To Cart

FoR 8mm Parting Tool

The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$95.00

In Stock

BC230

Add To Cart

FoR 9.5mm Parting Tool

The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.

$95.00

In Stock

BC269