Questions? Call 1-800-447-7367 or 231-946-3712


			
			

Subscriptions and Back Issues available in print and digital format.
Select preferred format after adding to your cart.

 
Thumbnail
MetalWorking Book Volume 5
Title
MetalWorking Book Volume 5
Author

Compiled by Neil Knopf and edited by Craig Foster and Clover McKinley

Description

Mike Pileski's "A Tool Block Carousel" and Arnold Teague's "Atkinson Cycle Engine" are among many standouts in the fifth installment of this series. Metalworking Book Five gives you 12 Technique articles, 8 Lathe Accessories, 7 Milling/Drilling Accessories, 21 Shop Improvement Projects, and 4 Hobby Projects. Reprinting the years 1996 and 1997, Metalworking Book Five provides an easy way to add to your machining library!

Hardbound. 228 pages.

 
Price
$42.00
Availability
In Stock
Order Code
M5
Thumbnail
MetalWorking Set - Books 4-6
Title
MetalWorking Set - Books 4-6
Description

Smart tools, techniques, and projects exclusively from the pages of Projects in Metal magazine, years 1994-1997. Books average 254 pages each, all hardbound. Three book set.

 
Price
$110.00
Availability
In Stock
Order Code
M4-M6 SET
Thumbnail
Shop Wisdom of James McKnight
Title
Shop Wisdom of James McKnight
Author

By James McKnight

Description

James began writing articles for The Home Shop Machinist and Machinist's Workshop magazines in 1991 and continues to share his expertise with Village Press publication readers. His clever, shop-built machine tools for both metal and woodworking have stood the test of time and delighted readers for nearly two decades.

Hardbound.

 
Price
$42.00
Availability
In Stock
Order Code
SWJM
Thumbnail
The Shop Wisdom of D. E. Johnson
Title
The Shop Wisdom of D. E. Johnson
Author

By Deene Johnson

Description

Mill-drill Adventures stand out as the single most popular series to have run in the early years of The Home Shop Machinist magazine. From Fixing Up the Downfeed to Indexing and Drilling, life got easier for new mill-drill machine owners.

Hardbound. 228 pages.

 
Price
$42.00
Availability
In Stock
Order Code
SWJ
Thumbnail
Welding Know-How: Tips and Techniques of Master Welders
Title
Welding Know-How: Tips and Techniques of Master Welders
Author

By Frank Marlow

Description

This book contains years of welding knowledge all in one easy-to-understand book. Contains over 500 clear and detailed line drawings. Chapters on the major welding processes: shielded metal arc, wire feed, and gas tungsten arc welding. Chapters on the major cutting processes, oxyacetylene, plasma arc, water jet, oxygen lances and burning bars. In addition there are chapters on brazing and soldering, bending and straightening, pipe and tubing, and an extensive section on welding safety. With this book you will finally gain control of your stick, TIG, or wire feed outfit and learn how to get your "buzz box" to make more than just noise.

Softbound. 552 pages.

 
Price
$49.95
Availability
In Stock
Order Code
WELD
Thumbnail
Build an Oil Fired Tilting Furnace
Title
Build an Oil Fired Tilting Furnace
Description

Complete plans and operating instructions for a tilting furnace that easily melts 100 pounds of aluminum per hour. Melt with propane, diesel, or used motor oil!

Using the tilting mechanism, you will never have to handle a hot crucible again. Start, stop, and hold the furnace at any angle for precise pours. Furnace may be modified to melt other materials.

Paperback, 192 pages.

 
Price
$24.95
Availability
In Stock
Order Code
OFTF
Thumbnail
Building a Small Steam Engine DVD
Title
Building a Small Steam Engine DVD
Description

by Rudy Kouhoupt

Build your own speedy little horizontal steam engine from Rudy's plans and description. Rudy does it all on a little Sherline lathe and mill. Plans and outline are included. 3 hours 40 minutes.

Watch a brief clip from the DVD.

 
Price
$49.95
Availability
In Stock
Order Code
BC76
Thumbnail
Grinding lathe Tools DVD
Title
Grinding lathe Tools DVD
Description

by Rudy Kouhoupt

Rudy discusses lathe cutting tools in depth and then describes how each would be ground properly for optimum metal cutting. Also included are plans to build a grinding table that will increase your accuracy when grinding your lathe tools. For those of you using the Diamond Toolholder, Rudy goes into great detail about grinding the toolbit for it. 1 hour 45 minutes.

 
Price
$39.95
Availability
Backordered
Order Code
BC66
Thumbnail
Iron Melting Cupola Furnaces for the Small Foundry
Title
Iron Melting Cupola Furnaces for the Small Foundry
Author

By Steve Chastain

Description

Here, Steve Chastain gives you complete plans and operating instructions for a 10" diameter cupola that will melt 330 lbs. of iron per hour when powered by a shop vac. Also included are plans for a high-pressure blower that will increase the output of the small furnace to 660 lb/hr. all can be built for little cost, mostly from scrap.

 
Price
$21.95
Availability
Backordered
Order Code
BC99
Thumbnail
MetalWorking Book Volume 6
Title
MetalWorking Book Volume 6
Author

Compiled by Neil Knopf and edited by Craig Foster and Clover McKinley

Description

Metalworking Book Six is one of the "beefiest" books Village Press has ever produced, Reprinting from mid 1997 through1998, with 11 Technique articles, 19 Lathe Accessories, 8 Milling/Drilling Accessories, 21 Shop Improvement Projects, and 4 Hobby Projects. Some of the highlights of this book include Pat Loop's "A Micro Drill Press" and Donald Dobias' "Making Gears Using a Hob."

Hardbound. 272 pages.

 
Price
$42.00
Availability
In Stock
Order Code
M6
Thumbnail
6 Projects for the Shaper DVD
Title
6 Projects for the Shaper DVD
Description

by Rudy Kouhoupt

In this DVD, Rudy describes and demonstrates how to make a tapered soft jaw for your vise, a pair of V-blocks, cut dovetail slides, external or internal keyseats and learn how to index and cut spur gears. Drawings, charts and outline included.

 
Price
$39.95
Availability
Backordered
Order Code
BC80
Thumbnail
Alternative Energy Secrets
Title
Alternative Energy Secrets
Author

By Stephen D. Chastain

Description

Stephen Chastain is a gifted mechanical engineer with an emphasis on material science. This book describes properties, processing and use of waste oil for diesel engines and burner applications fuel. Projects including collection and conversion equipment for use of waste oil, engine swapping, silencing and disposal of process sludge. Equipment is suitable for a small shop and may be built primarily from scrap materials such as discarded propane tanks, sheet metal, pipe and scrap aluminum. He discusses Oil and Fuels, Diesel Engines, Practical Alternative Fuel Technology, running on waste oil, installing a diesel engine in a car and off-grid power generation.

 
Price
$28.00
Availability
In Stock
Order Code
BC154
Thumbnail
Build a Muller - Sand Machinery Vol. 1
Title
Build a Muller - Sand Machinery Vol. 1
Description

Steve Chastain has just introduced his newest book. If you have built Steve's furnaces, then you know that melting a large amount of metal is easy. Properly preparing enough sand for the molds to hold all that metal can be a real chore, but here's professional grade foundry sand muller to take the work out of making molding sand. The plans in the book are scalable up or down to make a core sand muller or a 42-inch muller from a 500-gallon tank. Steve is a regular contributor to The Home Shop Machinist magazine as well as self publisher of his books. We are proud to carry all his titles.

 
Price
$22.95
Availability
In Stock
Order Code
BC94
Thumbnail
Machine Shop Know-How
Title
Machine Shop Know-How
Author

By Frank Marlow, PE

Description

If you've ever wished you could take all of the knowledge of a master machinist and pour it directly into your brain, here's your chance. Packed with useful and practical ideas you won't find anywhere else, Machine Shop Know-How proves that there are no secrets in the machine shop, just information that is rarely documented - until now. With its focus on manually controlled machine tools, Machine Shop Know-How moves beyond the basics to offer the problem-solving insights, imaginative short cuts, and clever tips and tricks of the trade that normally take years of hands-on shop experience to learn

528 pages. Softbound.

 
Price
$44.95
Availability
In Stock
Order Code
MSKH
Thumbnail
Building a Heat-Treating Furnace DVD
Title
Building a Heat-Treating Furnace DVD
Description

John Benjamin has been building firearms for many years. Some of the nation's most successful benchrest rifle barrels have been built by him. Part of his secret is the fantastic heat-treating furnace he built. He shows and describes how it is built, and how it is used.

by John Benjamin

Barrels are heated in a vertical position, and gently brought to a stage of stillness evenly throughout their entire length. His furnace has been used over 300 times without any evidence of wear. A bill of materials is included. 45 minutes

 
Price
$25.95
Availability
Backordered
Order Code
BC87
Thumbnail
Building a Stirling Hot Air Engine DVD
Title
Building a Stirling Hot Air Engine DVD
Description

by Rudy Kouhoupt

Here's a fast, free-running Stirling cycle hot air engine DVD that offers some machining challenges and hours and hours of fun. Dimensioned drawings (actual size) and outline are included. 3 hours 40 minutes.

 
Price
$49.95
Availability
In Stock
Order Code
BC184