Questions? Get Online Help
Call 1-800-447-7367 or 231-946-3712,
Monday-Friday 8AM-5PM EST.


			
			

Subscriptions and Back Issues available in print and digital format.
Select preferred format after adding to your cart.

Thumbnail
Building a Target Rifle DVD
Title
Building a Target Rifle DVD
Author

By Steve Acker

Description
This rifle was first described in The Home Shop Machinist magazine, and now is in video form. Steve uses some techniques and state-of-the-art tools never before seen on video. Every step of machining the receiver, bolt, barrel and scope mounts is shown. He discusses and shows the various components, tools and products he uses when building this highly precise firearm. 2 DVDs. 4 hours 10 minutes.
Price
$59.95
Availability
In Stock
Order Code
BC88
Thumbnail
Building Shop
Title
Building Shop
Author

By J. Randolph Bulgin

Description
Through his articles in The Home Shop Machinist and Machinist's Workshop, as well as his previous book, Randolph's Shop, the author has given thousands a chance to share in his pride and joy, his shop. Once again, Randolph throws open his doors and invites the reader into the comfortable surroundings of his little kingdom. But be warned, you may catch the bug and find youself in that endless (though arguably enjoyable) pursuite of builiding shop.
Hardbound. 228 pages.
Price
$39.95
Availability
In Stock
Order Code
BBS
Thumbnail
Building Track the Train Mountain Way DVD
Title
Building Track the Train Mountain Way DVD
Author

By Quentin Breen

Description
Quentin Breen, his volunteers and one employee have hand built every single one of the track sections. With pre-built forms, pre-cut parts and power equipment, a person can assemble a 12-foot straight, curved or wye section in a very short time. Quentin narrates the process as his employee assembles some sections from start to finish.
Price
$17.95
Availability
In Stock
Order Code
BC172
Thumbnail
Correcting Bolt Lug Engagement and Excess Headspace DVD
Title
Correcting Bolt Lug Engagement and Excess Headspace DVD
Author

By Steve Acker

Description
Steve demonstrates how a gunsmith can rework the Remington 700 bolt action rifle for more accuracy, using basic tooling and setups on the lathe and workbench. The work is done on a factory varmint rifle not as accurate as it should be, and which has long headspace. He improves bolt contact and the front receiver ring contact. 1 hour 35 minutes.
Price
$49.95
Availability
In Stock
Order Code
BC90
Thumbnail
Crobalt Cutoff Blade for FoR Parting Tool
Title
Crobalt Cutoff Blade for FoR Parting Tool
Description
FoR holder takes common 1/2" x 3/32" tapered type parting blade. Beveled top and bottom to lock securely into a holder.
The FoR Parting Tool Holder does not include a blade in the purchase, but these are widely available from several manufacturers and many suppliers worldwide. The blade is easily sharpened on any bench grinder and instructions for setting up, sharpening, and tips for best results, are included with the holder.
Blades are double bevel for use in Brown and Sharpe type holders. Can be used in either a right or left hand holder.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price
$70.00
Availability
In Stock
Order Code
BC210
Thumbnail
Crobalt Solid Round Bit 1/4"x2" L
Title
Crobalt Solid Round Bit 1/4"x2" L
Description
Crobalt solid round tool bits are furnished centerless ground to the tolerances shown above, with both ends ground square. These tool bits are appropriate for use in a Diamond Toolholder, for especially smooth cuts on tough materials. They are recommended for boring, drilling and reaming applications. Solid rounds can also be furnished to different tolerances, and in the as-cast condition with a stock allowance of .030" on the diameter.
This machine lathe metal-cutting tool assures you of a smooth finish on any metal or even hard plastic. Crobalt has proven itself to be the best of the new alloys.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price
$14.00
Availability
In Stock
Order Code
BC208
Thumbnail
Crobalt Solid Round Bit 3/16"x1-1/2" L
Title
Crobalt Solid Round Bit 3/16"x1-1/2" L
Description
These Crobalt tips are 3/16" x 1-1/2" with round ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This size is appropriate for the users of the new ML8mm Diamond Toolholders, designed for the small bench top lathes, such as the Unimat, Atlas 6", Sherline, and other new Asian lathes.
Crobalt cast alloy is an alternative tool bit to the HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium, there is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 1/4" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The lathe is a 1960s Colchester Chipmaster.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price
$14.00
Availability
In Stock
Order Code
BC239
Thumbnail
Crobalt Solid Round Bit 5/16"x2" L
Title
Crobalt Solid Round Bit 5/16"x2" L
Description
These Crobalt tips are ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This size is appropriate for the users of the new ML8mm Diamond Toolholders, designed for the small bench top lathes, such as the Unimat, Atlas 6", Sherline, and other new Asian lathes.
Crobalt cast alloy is an alternative tool bit to the HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium, there is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 1/4" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The lathe is a 1960s Colchester Chipmaster.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price
$16.00
Availability
In Stock
Order Code
BC268
Thumbnail
Crobalt Square Bit 1/4"x1-1/2" L
Title
Crobalt Square Bit 1/4"x1-1/2" L
Description
Crobalt cast alloy is an alternative tool bit to the 1/4" HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium, there is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 1/4" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The lathe is a 1960s Colchester Chipmaster.
The Crobalt tips are 1/4" x 1/4" x 1 1/2" (6.35mm x 6.35mm x 38mm) and they come with square cut ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price
$14.00
Availability
In Stock
Order Code
BC207
Thumbnail
Crobalt Square Bit 3/16"x1-1/2" L
Title
Crobalt Square Bit 3/16"x1-1/2" L
Description
Crobalt cast alloy is an alternative tool bit to the 3/16" HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium. There is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 3/16" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The Crobalt tips come with square cut ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This particular size is specifically chosen to work on the ML8 Diamond Toolholder, both Right-hand and Left-hand models.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price
$14.00
Availability
In Stock
Order Code
BC227
Thumbnail
Crobalt Square Bit 5/16"x1-1/2" L
Title
Crobalt Square Bit 5/16"x1-1/2" L
Description
Crobalt cast alloy is an alternative tool bit to the 5/16" HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium. There is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 5/16" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The lathe is a 1960s Colchester Chipmaster.
The Crobalt tips come with square cut ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This particular size is specifically chosen to work on the ML8 Diamond Toolholder, both Right-hand and Left-hand models.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price
$16.00
Availability
In Stock
Order Code
BC259
Thumbnail
Drilling, Reaming, Tapping and Milling on the Drill Press DVD
Title
Drilling, Reaming, Tapping and Milling on the Drill Press DVD
Author

By Rudy Kouhoupt

Description
Drilling, Reaming, Tapping and Milling on the Drill Press. Many people sell the drill press short when it comes to machining. Rudy demonstrates many operations that make it a very important part of your shop.
Watch a brief clip from the DVD.
Price
$35.95
Availability
In Stock
Order Code
BC74
Thumbnail
Falk No. 01 Locomotive - PRICE RECENTLY REDUCED
Title
Falk No. 01 Locomotive - PRICE RECENTLY REDUCED
Author

By William M. Harris

Description
In a series originally offered by Live Steam Magazine, the very popular 1-1/2" scale Elk River Mill & Lumber Company Falk logging engine continues to captivate builders.
Softbound. 64 pages.
Price
$12.95
Availability
In Stock
Order Code
FALK
Thumbnail
Figure It Out - Common Sense and a Calculator DVD
Title
Figure It Out - Common Sense and a Calculator DVD
Author

By Rudy Kouhoupt

Description
Did you ever wonder how high the valves should lift; what happens when you scale it up or down; how big the inlet passage should be; why small engines run so fast; how heavy it will be; how the flywheel effect changes with size; how to set your lathe for greater accuracy; or how to check tapers and angles? Rudy describes and illustrates his real world approach to problem solving on these and other subjects in the shop and at the drawing board. He includes an outline and drawings of examples used in the DVD presentation.
Watch a brief clip from the DVD.
Price
$35.95
Availability
In Stock
Order Code
BC75
Thumbnail
FoR 16mm Parting Tool
Title
FoR 16mm Parting Tool
Description
The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price
$105.00
Availability
In Stock
Order Code
BC271
Thumbnail
FoR 20mm Parting Tool
Title
FoR 20mm Parting Tool
Description
The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts.
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.
Price
$105.00
Availability
In Stock
Order Code
BC284