Questions? Get Online Help
Call 1-800-447-7367 or 231-946-3712,
Monday-Friday 8AM-5PM EST.











	

		
	

	

		
		

			
			
				
			
		

	








	

		

			
								
			
			

				

									

															

						
							
						
					

																				

						
							
						
					

																																								

										
				
				
				

					
				

				

					
Build the Snow -- A Tandem, Double-Acting Engine

				

				

					By Doug Kelley
				

				

					Doug Kelley's very popular Snow natural gas pumping engine, as an internal combustion engine construction series, first appeared in The Home Shop Machinist magazine. An ample supply of back issues in which the project appeared soon sold out -- encouraging reprint in a booklet format. The resulting 44-page plus cover saddle stitch volume includes 13 pages of photos that showcase full-size Snow engines housed in museum settings around the U.S. -- some that run and some that are being restored with the intent to run.				

				
				

					$14.95				

				

					In Stock				

				
				

					SNOW				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																																																		

										
				
				
				

					
				

				

					
Building a Heat-Treating Furnace DVD

				

				

					By John Benjamin
				

				

					John Benjamin has been building firearms for many years. Some of the nation's most successful benchrest rifle barrels have been built by him. Part of his secret is the fantastic heat-treating furnace he built. He shows and describes how it is built, and how it is used.
Barrels are heated in a vertical position, and gently brought to a stage of stillness evenly throughout their entire length. His furnace has been used over 300 times without any evidence of wear. A bill of materials is included. 45 minutes.				

				
				

					$25.95				

				

					In Stock				

				
				

					BC87				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																																																		

										
				
				
				

					
				

				

					
Building a Small Steam Engine DVD

				

				

					By Rudy Kouhoupt
				

				

					Build your own speedy little horizontal steam engine from Rudy's plans and description. Rudy does it all on a little Sherline lathe and mill. Plans and outline are included. 3 hours 40 minutes. 
Watch a brief clip from the DVD.				

				
				

					$49.95				

				

					In Stock				

				
				

					BC76				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																																																		

										
				
				
				

					
				

				

					
Building a Stirling Hot Air Engine DVD

				

				

					By Rudy Kouhoupt
				

				

					Here's a fast, free-running Stirling cycle hot air engine DVD that offers some machining challenges and hours and hours of fun. Dimensioned drawings (actual size) and outline are included. 3 hours 40 minutes.				

				
				

					$49.95				

				

					In Stock				

				
				

					BC184				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																																																		

										
				
				
				

					
				

				

					
Building a Target Rifle DVD

				

				

					By Steve Acker
				

				

					This rifle was first described in The Home Shop Machinist magazine, and now is in video form. Steve uses some techniques and state-of-the-art tools never before seen on video. Every step of machining the receiver, bolt, barrel and scope mounts is shown. He discusses and shows the various components, tools and products he uses when building this highly precise firearm. 2 DVDs. 4 hours 10 minutes.				

				
				

					$59.95				

				

					In Stock				

				
				

					BC88				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																																																		

										
				
				
				

					
				

				

					
Building the CliShay

				

				

					By Robert Maynard
				

				

					Our clever little CliShay locomotive is beautiful - both mythical and historical - designed to be a blend of the very early, very real Shay and Climax locomotives.
Building the CliShay will get both your heart and hobby started.
Spiralbound, 112 pages				

				
				

					$17.95				

				

					In Stock				

				
				

					CLISHAY				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																																																		

										
				
				
				

					
				

				

					
Building Track the Train Mountain Way DVD

				

				

					By Quentin Breen
				

				

					Quentin Breen, his volunteers and one employee have hand built every single one of the track sections. With pre-built forms, pre-cut parts and power equipment, a person can assemble a 12-foot straight, curved or wye section in a very short time. Quentin narrates the process as his employee assembles some sections from start to finish.				

				
				

					$17.95				

				

					In Stock				

				
				

					BC172				

				

			

		

	


	

		

			
								
			
			

				

									

																																																							

										
				
				
				

					
				

				

					
Classic Trains - 2025 Wall Calendar

				

				

					
These twelve classic black and white photographs from 1905 through 1938 picture the sunset of the locomotive steam age and the dawn of streamlined diesel and electric trains. All aboard for a sentimental journey down the tracks of time!
				

				
				

					$16.99				

				

					In Stock				

				
				

					LS02				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																																																		

										
				
				
				

					
				

				

					
Correcting Bolt Lug Engagement and Excess Headspace DVD

				

				

					By Steve Acker
				

				

					Steve demonstrates how a gunsmith can rework the Remington 700 bolt action rifle for more accuracy, using basic tooling and setups on the lathe and workbench. The work is done on a factory varmint rifle not as accurate as it should be, and which has long headspace. He improves bolt contact and the front receiver ring contact. 1 hour 35 minutes.				

				
				

					$49.95				

				

					In Stock				

				
				

					BC90				

				

			

		

	


	

		

			
								
			
			

				

									

																																																							

										
				
				
				

					
				

				

					
Crobalt Cutoff Blade for FoR Parting Tool

				

				

					FoR holder takes common 1/2" x 3/32" tapered type parting blade. Beveled  top and bottom to lock securely into a holder.
The FoR Parting Tool Holder does not include a blade in the purchase, but these are widely available from several manufacturers and many suppliers worldwide. The blade is easily sharpened on any bench grinder and instructions for setting up, sharpening, and tips for best results, are included with the holder.
Blades are double bevel for use in Brown and Sharpe type holders. Can be used in either a right or left hand holder.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.				

				
				

					$70.00				

				

					In Stock				

				
				

					BC210				

				

			

		

	


	

		

			
								
			
			

				

									

																																																							

										
				
				
				

					
				

				

					
Crobalt Solid Round Bit 3/16"x1-1/2" L

				

				

					These Crobalt tips are 3/16" x 1-1/2" with round ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This size is appropriate for the users of the new ML8mm Diamond Toolholders, designed for the small bench top lathes, such as the Unimat, Atlas 6", Sherline, and other new Asian lathes.
Crobalt cast alloy is an alternative tool bit to the HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium, there is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 1/4" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The lathe is a 1960s Colchester Chipmaster. 
Features/Tips
If backordered, shipping may take 2 to 3 weeks.				

				
				

					$14.00				

				

					In Stock				

				
				

					BC239				

				

			

		

	


	

		

			
								
			
			

				

									

																																																							

										
				
				
				

					
				

				

					
Crobalt Solid Round Bit 5/16"x2" L

				

				

					These Crobalt tips are ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This size is appropriate for the users of the new ML8mm Diamond Toolholders, designed for the small bench top lathes, such as the Unimat, Atlas 6", Sherline, and other new Asian lathes.
Crobalt cast alloy is an alternative tool bit to the HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium, there is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 1/4" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The lathe is a 1960s Colchester Chipmaster.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.				

				
				

					$16.00				

				

					In Stock				

				
				

					BC268				

				

			

		

	


	

		

			
								
			
			

				

									

																																																							

										
				
				
				

					
				

				

					
Crobalt Square Bit 3/16"x1-1/2" L

				

				

					Crobalt cast alloy is an alternative tool bit to the 3/16" HSS tips usually used in the Diamond Tool Holders, its ideal for turning tough materials such as stainless, cast iron, and high carbon steels. Tougher and less brittle than carbide it can be ground using a normal aluminum oxide wheel, Crobalt contains 50% cobalt with the remainder being tungsten and chromium. There is no iron or steel in the alloy.
Watch the Diamond Toolholder in action doing a comparison test between M42 HSS (CoHSS) and Crobalt cast alloy -- both toolbits are 3/16" square.
They are being used in a Right Hand 12mm model Diamond Tool Holder, to turn 304 and 316 stainless bar and an interrupted cut on a piece of cast iron.
The Crobalt tips come with square cut ends to be ground to the correct angle by the customer, using the Diamond Tool Holder grinding jig that comes with each tool holder kit. This particular size is specifically chosen to work on the ML8 Diamond Toolholder, both Right-hand and Left-hand models.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.				

				
				

					$14.00				

				

					In Stock				

				
				

					BC227				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																																																		

										
				
				
				

					
				

				

					
Drilling, Reaming, Tapping and Milling on the Drill Press DVD

				

				

					By Rudy Kouhoupt
				

				

					Drilling, Reaming, Tapping and Milling on the Drill Press. Many people sell the drill press short when it comes to machining. Rudy demonstrates many operations that make it a very important part of your shop. 
Watch a brief clip from the DVD.				

				
				

					$35.95				

				

					In Stock				

				
				

					BC74				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																				

						
							
						
					

																																								

										
				
				
				

					
				

				

					
Falk No. 01 Locomotive - PRICE RECENTLY REDUCED

				

				

					By William M. Harris
				

				

					In a series originally offered by Live Steam Magazine, the very popular 1-1/2" scale Elk River Mill & Lumber Company Falk logging engine continues to captivate builders.
Softbound. 64 pages.				

				
				

					$12.95				

				

					In Stock				

				
				

					FALK				

				

			

		

	


	

		

			
								
			
			

				

									

															

						
							
						
					

																																																		

										
				
				
				

					
				

				

					
Figure It Out - Common Sense and a Calculator DVD

				

				

					By Rudy Kouhoupt
				

				

					Did you ever wonder how high the valves should lift; what happens when you scale it up or down; how big the inlet passage should be; why small engines run so fast; how heavy it will be; how the flywheel effect changes with size; how to set your lathe for greater accuracy; or how to check tapers and angles? Rudy describes and illustrates his real world approach to problem solving on these and other subjects in the shop and at the drawing board. He includes an outline and drawings of examples used in the DVD presentation. 
Watch a brief clip from the DVD.				

				
				

					$35.95				

				

					In Stock				

				
				

					BC75				

				

			

		

	


	

		

			
								
			
			

				

									

																																																							

										
				
				
				

					
				

				

					
FoR 16mm Parting Tool

				

				

					The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts. 
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.				

				
				

					$105.00				

				

					In Stock				

				
				

					BC271				

				

			

		

	


	

		

			
								
			
			

				

									

																																																							

										
				
				
				

					
				

				

					
FoR 20mm Parting Tool 

				

				

					The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts. 
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.				

				
				

					$105.00				

				

					In Stock				

				
				

					BC284				

				

			

		

	


	

		

			
								
			
			

				

									

																																																							

										
				
				
				

					
				

				

					
FoR 8mm Parting Tool

				

				

					The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts. 
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.				

				
				

					$95.00				

				

					In Stock				

				
				

					BC230				

				

			

		

	


	

		

			
								
			
			

				

									

																																																							

										
				
				
				

					
				

				

					
FoR 9.5mm Parting Tool

				

				

					The FoR Inverted Parting Toolholder operates with the blade held in an upside down position and can be used on front or rear tool posts. 
For lathes with a screw on chuck the holder must be used with a rear tool post.
Parting blade not included.
Features/Tips
If backordered, shipping may take 2 to 3 weeks.				

				
				

					$95.00				

				

					In Stock				

				
				

					BC269				

				

			

		

	





		

		
	

	

		
		

			
			
				
			
		

	




** US Pricing. Foreign pricing applied during checkout process.