Thumbnail
Projects 10
Title
Projects 10
Description

Projects Ten features articles from the years 2001 and 2002. This edition features 14 Techniques, 12 Lathe Accessories, 6 Milling and Drilling Machine Accessories, 10 Shop Improvement Articles, 3 Hobby Projects, and 2 Research for Mastery Articles. The new Research for Mastery section features George Genevro and Doug Kelley. Genevro discusses the Continental A-40 Aircraft Engine and Kelley shares his Notes on Building a Nine-Cylinder Radial Aircraft Engine.

Hardbound. 200 pages.

 
Price
$45.00
Availability
In Stock
Order Code
P10
Thumbnail
Projects 5
Title
Projects 5
Author

Compiled and edited by Joe D. Rice

Description

With John Gascoyne's gorgeous "The Rotary, Dual Cross-slide Drill Press and Milling Machine Table" article, John Maruschak's "Toggle-link Operated Can Crusher," and Rodney Hanson's "Hand-operated Plastic Injection Molding Machine," Projects Five has a fantastic mix of articles. Reprinting the years 1989, 1990, and 1991, Projects Five contains 17 Techniques, 7 Lathe Accessories, 10 Milling Machine Accessories, 8 Shop Improvement Articles, and 2 Hobby Projects.

Hardbound. 200 pages.

 
Price
$45.00
Availability
In Stock
Order Code
P5
Thumbnail
Projects 6
Title
Projects 6
Author

Compiled and edited by Joe D. Rice

Description

Reprinting the years 1992, 1993, and 1994, Projects Six is one of our largest volumes! Inside, you'll find 17 Technique Articles, 2 Drill Press Accessories, 9 Lathe Accessories, 8 Milling Machine Accessories, 8 Shop Improvement Projects, and 1 Hobby Project. Some of the highlights of this edition include John Snyder's "Wood Carving Machine," Michael Hoff's "Simple Indexing Rotary Table," and Richard Torgerson's "Quick-change Tool Post System."

Hardbound. 240 pages.

 
Price
$45.00
Availability
In Stock
Order Code
P6
Thumbnail
Projects 7
Title
Projects 7
Author

Compiled and edited by Joe D. Rice

Description

With issue years 1989 through 1996 contained in its pages, Projects Seven will add 6 years of The Home Shop Machinist to your book shelf! Projects Seven is also the only place where you will find Roland Friestad's first four CNC articles - the ones he wrote before his "Computers in the Shop" column. Of course, manual machining is the focus of Projects Seven, with 21 Techniques, 7 Lathe Accessories, 5 Milling Machine Accessories, 12 Shop Improvement Articles, and 4 Hobby Projects.

Hardbound. 200 pages.

 
Price
$45.00
Availability
In Stock
Order Code
P7
Thumbnail
Projects 9
Title
Projects 9
Author

Compiled by Craig Foster and edited by Neil Knopf

Description

With such articles as Richard Butterick's "Tapping Machine" and Jeffrey Maier's "Free Pendulum Clock," Projects Nine is a winner! Collecting issues originally printed in 2000 and 2001, Projects Nine features 8 Techniques, 3 Lathe Accessories, 2 Milling and Drilling Machine Articles, 12 Shop Improvement Articles, and 3 Hobby Projects.

Hardbound. 200 pages.

 
Price
$45.00
Availability
In Stock
Order Code
P9
Thumbnail
Tesla Turbine and other Engines from Jeff Maier
Title
Tesla Turbine and other Engines from Jeff Maier
Author

By Jeff Maier

Description

The Tesla Turbine, Two-cylinder Uniflow Engine, Terry Turbine, and the Horizontal Uniflow Engine were originally published in the pages of The Home Shop Machinist and Live Steam and Outdoor Railroading. Now see them collected in this gorgeous volume!

Hardbound. 184 pages.

 
Price
$42.00
Availability
In Stock
Order Code
TESLA
Thumbnail
The Shop Wisdom of D. E. Johnson
Title
The Shop Wisdom of D. E. Johnson
Author

By Deene Johnson

Description

Mill-drill Adventures stand out as the single most popular series to have run in the early years of The Home Shop Machinist magazine. From Fixing Up the Downfeed to Indexing and Drilling, life got easier for new mill-drill machine owners.

Hardbound. 228 pages.

 
Price
$42.00
Availability
In Stock
Order Code
SWJ
Thumbnail
The Shop Wisdom of Jesse Livingston
Title
The Shop Wisdom of Jesse Livingston
Author

By Jesse Livingston

Description

Metal casting and foundry work, two 1-1/2" scale steam locomotives, three unusual steam-powered engines, and more! Make Jesse your mentor.

Hardbound. 180 pages.

 
Price
$42.00
Availability
In Stock
Order Code
SWL
Thumbnail
Alternative Energy Secrets
Title
Alternative Energy Secrets
Author

By Stephen D. Chastain

Description

Stephen Chastain is a gifted mechanical engineer with an emphasis on material science. This book describes properties, processing and use of waste oil for diesel engines and burner applications fuel. Projects including collection and conversion equipment for use of waste oil, engine swapping, silencing and disposal of process sludge. Equipment is suitable for a small shop and may be built primarily from scrap materials such as discarded propane tanks, sheet metal, pipe and scrap aluminum. He discusses Oil and Fuels, Diesel Engines, Practical Alternative Fuel Technology, running on waste oil, installing a diesel engine in a car and off-grid power generation.

 
Price
$28.00
Availability
In Stock
Order Code
BC154
Thumbnail
Build an Oil Fired Tilting Furnace
Title
Build an Oil Fired Tilting Furnace
Description

Complete plans and operating instructions for a tilting furnace that easily melts 100 pounds of aluminum per hour. Melt with propane, diesel, or used motor oil!

Using the tilting mechanism, you will never have to handle a hot crucible again. Start, stop, and hold the furnace at any angle for precise pours. Furnace may be modified to melt other materials.

Paperback, 192 pages.

 
Price
$24.95
Availability
In Stock
Order Code
OFTF
Thumbnail
Building Shop by J. Randolph Bulgin
Title
Building Shop by J. Randolph Bulgin
Author

By J. Randolph Bulgin

Description

Through his articles in The Home Shop Machinist and Machinist's Workshop, as well as his previous book, Randolph's Shop, the author has given thousands a chance to share in his pride and joy, his shop. Once again, Randolph throws open his doors and invites the reader into the comfortable surroundings of his little kingdom. But be warned, you may catch the bug and find youself in that endless (though arguably enjoyable) pursuite of builiding shop.

Hardbound. 228 pages.

 
Price
$39.95
Availability
In Stock
Order Code
BBS
Thumbnail
Generators and Inverters
Title
Generators and Inverters
Author

By Stephen Chastain

Description

Steve Chastain's newest book give you the guidance to design and build your own power plant. It's the most complete small generator reference and go-to book available. Everything you need to know about building or buying small power plants. This book answers a slew of questions about generating your own electricity.

Now in Hardcover.

 
Price
$34.95
Availability
In Stock
Order Code
BC98
Thumbnail
In Pursuit of The Perfect Shop
Title
In Pursuit of The Perfect Shop
Author

By J. Randolph Bulgin

Description

As one of our popular authors in the Village Press metalworking magazines, Randolph's words and easy-to-follow and learn-from writing style has helped new hobbyists (and experienced metalworkers) build a strong foundation of machining knowledge - both as a hobby and a profession. In Pursuit of The Perfect Shop adds another cornerstone to that foundation.

228 pages. Hardbound.

 
Price
$39.95
Availability
In Stock
Order Code
TPS
Thumbnail
MetalWorking Book Volume 4
Title
MetalWorking Book Volume 4
Author

Compiled by Neil Knopf and edited by Clover McKinley

Description

Reprinting Projects in Metal from the years 1994 and 1995, Metalworking Book Four gives you 12 Technique articles, 12 Lathe Accessories, 12 Milling/Drilling Machine Accessories, 19 Shop Improvement articles, and 1 Hobby Project. Headlined by Fred LaVenuta's "Home Sandblasting Cabinet" and Harold Mason's "The Tripod Eliminator - Making a Stand for Better Pictures," this book is bound to be a wonderful addition to your bookshelf.

Hardbound. 255 pages.

 
Price
$42.00
Availability
In Stock
Order Code
M4
Thumbnail
MetalWorking Book Volume 5
Title
MetalWorking Book Volume 5
Author

Compiled by Neil Knopf and edited by Craig Foster and Clover McKinley

Description

Mike Pileski's "A Tool Block Carousel" and Arnold Teague's "Atkinson Cycle Engine" are among many standouts in the fifth installment of this series. Metalworking Book Five gives you 12 Technique articles, 8 Lathe Accessories, 7 Milling/Drilling Accessories, 21 Shop Improvement Projects, and 4 Hobby Projects. Reprinting the years 1996 and 1997, Metalworking Book Five provides an easy way to add to your machining library!

Hardbound. 228 pages.

 
Price
$42.00
Availability
In Stock
Order Code
M5
Thumbnail
MetalWorking Book Volume 6
Title
MetalWorking Book Volume 6
Author

Compiled by Neil Knopf and edited by Craig Foster and Clover McKinley

Description

Metalworking Book Six is one of the "beefiest" books Village Press has ever produced, Reprinting from mid 1997 through1998, with 11 Technique articles, 19 Lathe Accessories, 8 Milling/Drilling Accessories, 21 Shop Improvement Projects, and 4 Hobby Projects. Some of the highlights of this book include Pat Loop's "A Micro Drill Press" and Donald Dobias' "Making Gears Using a Hob."

Hardbound. 272 pages.

 
Price
$42.00
Availability
In Stock
Order Code
M6