Questions? Get Online Help
Call 1-800-447-7367 or 231-946-3712,
Monday-Friday 8AM-5PM EST.






			



6 Projects for the Shaper DVD

6 Projects for the Shaper DVD

By Rudy Kouhoupt

In this DVD, Rudy describes and demonstrates how to make a tapered soft jaw for your vise, a pair of V-blocks, cut dovetail slides, external or internal keyseats and learn how to index and cut spur gears. Drawings, charts and outline included.

$39.95

In Stock

BC80

Advanced Aspects of Machine Lathe Operation DVD

Advanced Aspects of Machine Lathe Operation DVD

By Rudy Kouhoupt

Rudy's back with two hours worth of excellent advanced techniques for achieving a very high degree of accuracy while boring, turning, facing, threading, milling or grinding on your lathe. He also discusses and demonstrates the most important accessories you will use on your lathe. 2 hours.

$44.95

In Stock

BC63

Advanced Aspects of Milling Machine Operation DVD

Advanced Aspects of Milling Machine Operation DVD

By Rudy Kouhoupt

On this machining DVD, Rudy shows you the methods by which your mill can be highly accurate in every function. He also describes techniques that will expand the usefulness of your mill and improve your level of skill dramatically. Various accessories are discussed and demonstrated. A printed outline accompanies the DVD. 2 hours.
Watch a brief clip from the DVD.

$44.95

In Stock

BC71

Bedding, Scoping, and Crowning the Remington 700 - DVD

Bedding, Scoping, and Crowning the Remington 700 - DVD

By Steve Acker

Steve shows how to have a rifle that is easier to shoot accurately, with little shift in zero, using only hand tools. Bedding techniques demonstrated on three styles of stock. His methods for mounting and lapping in a scope and crowning process will assure you of improved shooting. 2 hours.

$49.95

In Stock

BC89

Building a Heat-Treating Furnace DVD

Building a Heat-Treating Furnace DVD

By John Benjamin

John Benjamin has been building firearms for many years. Some of the nation's most successful benchrest rifle barrels have been built by him. Part of his secret is the fantastic heat-treating furnace he built. He shows and describes how it is built, and how it is used.
Barrels are heated in a vertical position, and gently brought to a stage of stillness evenly throughout their entire length. His furnace has been used over 300 times without any evidence of wear. A bill of materials is included. 45 minutes.

$25.95

In Stock

BC87

Building a Small Steam Engine DVD

Building a Small Steam Engine DVD

By Rudy Kouhoupt

Build your own speedy little horizontal steam engine from Rudy's plans and description. Rudy does it all on a little Sherline lathe and mill. Plans and outline are included. 3 hours 40 minutes.
Watch a brief clip from the DVD.

$49.95

In Stock

BC76

Building a Stirling Hot Air Engine DVD

Building a Stirling Hot Air Engine DVD

By Rudy Kouhoupt

Here's a fast, free-running Stirling cycle hot air engine DVD that offers some machining challenges and hours and hours of fun. Dimensioned drawings (actual size) and outline are included. 3 hours 40 minutes.

$49.95

In Stock

BC184

Building a Target Rifle DVD

Building a Target Rifle DVD

By Steve Acker

This rifle was first described in The Home Shop Machinist magazine, and now is in video form. Steve uses some techniques and state-of-the-art tools never before seen on video. Every step of machining the receiver, bolt, barrel and scope mounts is shown. He discusses and shows the various components, tools and products he uses when building this highly precise firearm. 2 DVDs. 4 hours 10 minutes.

$59.95

In Stock

BC88

Building Track the Train Mountain Way DVD

Building Track the Train Mountain Way DVD

By Quentin Breen

Quentin Breen, his volunteers and one employee have hand built every single one of the track sections. With pre-built forms, pre-cut parts and power equipment, a person can assemble a 12-foot straight, curved or wye section in a very short time. Quentin narrates the process as his employee assembles some sections from start to finish.

$17.95

In Stock

BC172

Correcting Bolt Lug Engagement and Excess Headspace DVD

Correcting Bolt Lug Engagement and Excess Headspace DVD

By Steve Acker

Steve demonstrates how a gunsmith can rework the Remington 700 bolt action rifle for more accuracy, using basic tooling and setups on the lathe and workbench. The work is done on a factory varmint rifle not as accurate as it should be, and which has long headspace. He improves bolt contact and the front receiver ring contact. 1 hour 35 minutes.

$49.95

In Stock

BC90

Drilling, Reaming, Tapping and Milling on the Drill Press DVD

Drilling, Reaming, Tapping and Milling on the Drill Press DVD

By Rudy Kouhoupt

Drilling, Reaming, Tapping and Milling on the Drill Press. Many people sell the drill press short when it comes to machining. Rudy demonstrates many operations that make it a very important part of your shop.
Watch a brief clip from the DVD.

$35.95

In Stock

BC74

Figure It Out - Common Sense and a Calculator DVD

Figure It Out - Common Sense and a Calculator DVD

By Rudy Kouhoupt

Did you ever wonder how high the valves should lift; what happens when you scale it up or down; how big the inlet passage should be; why small engines run so fast; how heavy it will be; how the flywheel effect changes with size; how to set your lathe for greater accuracy; or how to check tapers and angles? Rudy describes and illustrates his real world approach to problem solving on these and other subjects in the shop and at the drawing board. He includes an outline and drawings of examples used in the DVD presentation.
Watch a brief clip from the DVD.

$35.95

In Stock

BC75

Fundamentals of Machine Lathe Operation DVD

Fundamentals of Machine Lathe Operation DVD

By Rudy Kouhoupt

Rudy thoroughly covers the basics of facing, boring and turning on the lathe. Included are plans and directions for a project to practice your skills. He demonstrates on his 1933 9" South Bend lathe. Rudy Kouhoupt has been the premiere teacher of machining for novice machinists everywhere. His seven books and 17 machining DVDs are perfect examples of his knowledge and skills.1 hour, 35 minutes.

$44.95

In Stock

BC70

Fundamentals of Milling Machine Operation DVD

Fundamentals of Milling Machine Operation DVD

By Rudy Kouhoupt

The basics of milling on a vertical milling machine are covered. Included are a printed outline, plans and directions for a project to practice your new skills -- an excellent fly cutter. 2 hours.

$44.95

In Stock

BC62

Grinding lathe Tools DVD

Grinding lathe Tools DVD

By Rudy Kouhoupt

Rudy discusses lathe cutting tools in depth and then describes how each would be ground properly for optimum metal cutting. Also included are plans to build a grinding table that will increase your accuracy when grinding your lathe tools. For those of you using the Diamond Toolholder, Rudy goes into great detail about grinding the toolbit for it. 1 hour 45 minutes.

$39.95

In Stock

BC66

Hot Bluing Firearms DVD

Hot Bluing Firearms DVD

By Steve Acker

The chemical and mechanical processes of hot bluing steel are described by Steve. He then demonstrates the procedures with the best quality equipment and materials. He also describes how you can blue your firearms on a limited budget. Learn to apply a professional finish to your firearms and restore the beauty of your old ones. See a layout used by professionals for profitable bluing and excellent results. Equipment, alternate heat sources and safety concerns are discussed in detail. 1 hour 10 minutes.

$49.95

In Stock

BC92

How to Cut Screw Threads DVD

How to Cut Screw Threads DVD

By Rudy Kouhoupt

Screw Thread forms, and parts, cutting calculations and techniques for cutting threads on the lathe are described and demonstrated. Printed charts and tables are included with this machining DVD. 1 hour.

$35.95

In Stock

BC64

How to Cut Spur Gears DVD

How to Cut Spur Gears DVD

By Rudy Kouhoupt

Using just a small mill and your lathe, you can learn how to cut your own spur gears. Terms and techniques are all covered. Charts and tables are included. 45 minutes.
Watch a brief clip from the DVD.

$35.95

In Stock

BC65

Laying Track at Train Mountain DVD

Laying Track at Train Mountain DVD

By Quentin Breen

Quentin Breen describes the complex and very thorough process of laying track on the 17 miles of 7-1/2" gauge track over the very hilly terrain at Train Mountain in Chiloquin, Oregon. Volunteers demonstrate the process.

$17.95

In Stock

BC171

Machine Lathe - Fundamentals and Advanced Operation DVD Set

Machine Lathe - Fundamentals and Advanced Operation DVD Set

By Rudy Kouhoupt

Combined for the first time in one discounted package, Fundamentals of Machine Lathe Operation and Advanced Aspects of Machine Lathe Operation DVDs are just what you need to learn and master your lathe. Save 10% by purchasing the set!

$80.00

In Stock

BC286

** US Pricing. Foreign pricing applied during checkout process.