Thumbnail
L8mm Diamond Toolholder
Title
L8mm Diamond Toolholder
Description

Diamond Toolholder's unique design provides a number of benefits over standard tooling, both in use and when sharpening. When cutting, 80 degree included angle of tool allows machinist to both turn and face in same setup, saving time and tooling. When it comes time to sharpen toolbit, simply clamp it in sharpening jig (supplied with Right Hand Toolholder kit) and grind. That's all there is to sharpening toolbit -- no complicated geometry, only one face needs grinding. Get prefect results every time!

L8mm Toolholder is perfect size for smaller, 6-9 inch lathes, such as South Bend 9 or Myford 8. Toolholder uses 1/4" square toolbits and features a 7/16"x1/2" shank size. "L" denotes a left hand toolholder, which will cut towards lathe tailstock and will do facing cuts on shoulders to right side of tool. Right hand toolholders are also available.

Tool holder size will depend on a combination of size of your lathe and type of tool post fitted. Model number indicates distance in millimeters from bottom of tool post tool slot to lathe centerline. Check tool height and size of tool slot in tool post before purchasing.

L8mm Toolholder includes:
- 1 Left Hand Toolholder
- 1 HSS Tool Blank

NOTE: This model includes the HSS tool blank only, assuming you already own Right Hand Diamond Toolholder, which comes with a Hex Key, Grinding Jig, DVD, and HSM article reprints.

Features/Tips | Selecting Size | Right/Left Handed

BACKORDERED. NOT EXPECTED BACK IN STOCK UNTIL AUGUST 2019.

 
Price
$110.00
Availability
In Stock
Order Code
BC193
Thumbnail
L9.5mm Diamond Toolholder
Title
L9.5mm Diamond Toolholder
Description

Diamond Toolholder's unique design provides a number of benefits over standard tooling, both in use and when sharpening. When cutting, 80 degree included angle of tool allows machinist to both turn and face in same setup, saving time and tooling. When it comes time to sharpen toolbit, simply clamp it in sharpening jig (supplied with Right Hand Toolholder kit) and grind. That's all there is to sharpening toolbit -- no complicated geometry, only one face needs grinding. Get prefect results every time!

L9.5mm Toolholder is perfect size for smaller, 9-12 inch lathes such as South Bend 9 or Logan 10. Toolholder uses 1/4" square toolbits and features a 1/2"x1/2" shank size. "L" denotes a left hand toolholder, which will cut towards lathe tailstock and will do facing cuts on shoulders to right side of tool. Right hand toolholders are also available.

Tool holder size will depend on a combination of size of your lathe and type of tool post fitted. Model number indicates distance in millimeters from bottom of tool post tool slot to lathe centerline. Check tool height and size of tool slot in tool post before purchasing.

L9.5mm Toolholder includes:
- 1 Left Hand Toolholder
- 1 HSS Tool Blank

NOTE: This model includes the HSS tool blank only, assuming you already own Right Hand Diamond Toolholder, which comes with a Hex Key, Grinding Jig, DVD, and HSM article reprints.

Features/Tips | Selecting Size | Right/Left Handed

 
Price
$115.00
Availability
In Stock
Order Code
BC60
Thumbnail
L12mm Diamond Toolholder
Title
L12mm Diamond Toolholder
Description

Diamond Toolholder's unique design provides a number of benefits over standard tooling, both in use and when sharpening. When cutting, 80 degree included angle of tool allows machinist to both turn and face in same setup, saving time and tooling. When it comes time to sharpen toolbit, simply clamp it in sharpening jig (supplied with Right Hand Toolholder kit) and grind. That's all there is to sharpening toolbit -- no complicated geometry, only one face needs grinding. Get prefect results every time!

L12mm Toolholder is perfect size for 7-12 inch lathes and it works well with toolpost heights found on most Asian imports. Toolholder uses 1/4" square toolbits and features a 15/32"x19/32" shank size. "L" denotes a left hand toolholder, which will cut towards lathe tailstock and will do facing cuts on shoulders to right side of tool. Right hand toolholders are also available.

Tool holder size will depend on a combination of size of your lathe and type of tool post fitted. Model number indicates distance in millimeters from bottom of tool post tool slot to lathe centerline. Check tool height and size of tool slot in tool post before purchasing.

L12mm Toolholder includes:
- 1 Left Hand Toolholder
- 1 HSS Tool Blank

NOTE: This model includes the HSS tool blank only, assuming you already own Right Hand Diamond Toolholder, which comes with a Hex Key, Grinding Jig, DVD, and HSM article reprints.

Features/Tips | Selecting Size | Right/Left Handed

If backordered, shipping may take 2 to 3 weeks.

 
Price
$115.00
Availability
In Stock
Order Code
BC195
Thumbnail
L16mm Diamond Toolholder
Title
L16mm Diamond Toolholder
Description

Diamond Toolholder's unique design provides a number of benefits over standard tooling, both in use and when sharpening. When cutting, 80 degree included angle of tool allows machinist to both turn and face in same setup, saving time and tooling. When it comes time to sharpen toolbit, simply clamp it in sharpening jig (supplied with Right Hand Toolholder kit) and grind. That's all there is to sharpening toolbit -- no complicated geometry, only one face needs grinding. Get prefect results every time!

L16mm Toolholder is perfect size for medium to large sized lathes, 12-19 inches in swing. toolholder uses 5/16" square toolbits and features a .672"x5/8"x3-1/2" shank size for increased ridgidity. "L" denotes a left hand toolholder, which will cut towards lathe tailstock and will do facing cuts on shoulders to right side of tool. Right hand toolholders are also available.

Tool holder size will depend on a combination of size of your lathe and type of tool post fitted. Model number indicates distance in millimeters from bottom of tool post tool slot to lathe centerline. Check tool height and size of tool slot in tool post before purchasing.

L16mm Toolholder includes:
- 1 Left Hand Toolholder
- 1 HSS Tool Blank

NOTE: This model includes the HSS tool blank only, assuming you already own Right Hand Diamond Toolholder, which comes with a Hex Key, Grinding Jig, DVD, and HSM article reprints.

Features/Tips | Selecting Size | Right/Left Handed

If backordered, shipping may take 2 to 3 weeks.

 
Price
$135.00
Availability
In Stock
Order Code
BC258
Thumbnail
L20mm Diamond Toolholder
Title
L20mm Diamond Toolholder
Description

Diamond Toolholder's unique design provides a number of benefits over standard tooling, both in use and when sharpening. When cutting, 80 degree included angle of tool allows machinist to both turn and face in same setup, saving time and tooling. When it comes time to sharpen toolbit, simply clamp it in sharpening jig (supplied with Right Hand Toolholder kit) and grind. That's all there is to sharpening toolbit -- no complicated geometry, only one face needs grinding. Get prefect results every time!

L20mm Toolholder is perfect size for heavy-duty lathes capable of using 3/4" tooling. Toolholder uses 5/16" square toolbits and features a 3/4"x3/4" shank size for increased ridgidity. "L" denotes a left hand toolholder, which will cut towards lathe tailstock and will do facing cuts on shoulders to right side of tool. Right hand toolholders are also available.

Tool holder size will depend on a combination of size of your lathe and type of tool post fitted. Model number indicates distance in millimeters from bottom of tool post tool slot to lathe centerline. Check tool height and size of tool slot in tool post before purchasing.

L20mm Toolholder includes:
- 1 Left Hand Toolholder
- 1 HSS Tool Blank

NOTE: This model includes the HSS tool blank only, assuming you already own Right Hand Diamond Toolholder, which comes with a Hex Key, Grinding Jig, DVD, and HSM article reprints.

Features/Tips | Selecting Size | Right/Left Handed

If backordered, shipping may take 2 to 3 weeks.

 
Price
$135.00
Availability
In Stock
Order Code
BC255